17 Apr 2024

Elpress GRS1560LC-4

The Elpress GRS1560LC-4 is a crimping tool for solar connectors such as the MC4™ and others like it. It is the perfect tool for solar panel installers. This tool has been tested and certified for crimping terminals with a diameter of 4 mm/0.157”. Cable area 1.5-2.5; 4.0; 6.0 mm²/AWG 16-14; 12; 10.
(MC4™ is a trademark owned by Multi-Holding AG).

Products used in this article

More Elpress News:

About us Elpress News Innovations Cases Global distribution

    Products
    • Cu terminals
      The terminals for Cu conductors 0.75 mm² to 1000 mm² are made of copper 99.9%
      AlCu terminals
      Elpress AlCu terminals for Al conductors are made of solid material.
      Al terminals
      Elpress terminals for Al conductors 16 mm² to 1200 mm² are made of solid aluminium 99.7%.
      C sleeves
      Branching sleeves for Cu conductors 6-300 mm², made of copper 99.95%.
      Pre-insulated terminals
      Elpress’ pre-insulated terminal consist of ring, fork and pin terminals made of copper and flat and round pin terminals of brass or tin bronze.
      Un-insulated terminals
      Elpress uninsulated connections up to 10 mm² consists of through connectors, rings, ferrules, forks and pin terminals made of electrolytic copper.
      End terminals
      Elpress pre-insulated and uninsulated end terminals are made of tin-plated copper.
      Overhead line connectors
      Elpress has a programme for overhead line joints that comprises products for copper lines, alloyed aluminium lines of type AlMgSi (Super B) and Al59 and FeAl lines.
      Shearbolt connectors
      Shearbolt connectors are intended for stranded and solid aluminium and copper cable, low voltage and medium voltage up to 36 kV.
    • Mechanical hand tools
      Mechanical hand tools for crimping 0,14-120 mm².
      3,5 t system
      Electrohydraulic, electromechanical and hydraulic hand tools with up to 3.5 tons of pressing force.
      6 t system
      Crimping heads, hydraulic hand tools and battery-powered crimping tools with up to 6 tons of crimp force.
      13 t system
      Crimping heads, hydraulic hand tools and battery-powered crimping tools with up to 13 tons of crimp force.
      25 t system
      Crimping heads with up to 25 tons of crimp force.
      35 t system
      Crimping heads with up to 35 tons of crimp force.
      40 t system
      Crimping heads with up to 40 tons of crimp force.
      Hydraulic pumps
      Hydraulic foot pump and mains and battery operated pumps.
      Crimp stations and table stands
      Crimp stations for industrial crimping. Table stands designed for operators with high frequency use of the C2 crimp head.
      Dies, matrices and punches
    • Cutting tools
      Hydraulic cable cutters
    • Assortment boxes
      Cable joint and terminal
      Cable clamps
    • Deep earthing system FS
      Accessories for depth earthing, tip, leading rod, extension rod, withdrawal handle and driving cap.
      Deep earthing system FSHD
      Accessories for depth earthing, tip, leading rod andextension rod. For hard and stony soils.
      Driving studs for FS and FSHD
      Driving studs for Elpress deep earthing system, specially designed for use with the FS21 and FS31 rod.