System Elpress

Download certificate.

Quality assurance of our tools is made by certification, already in the manufacturing process of the crimping tools.

All Elpress hydraulic and mechanical crimping tools are calibrated and controlled at final assembly. These controls result in a unique tool certificate that is directly linked to the tool’s serial number. The certificate shows that each individual tool meets the requirements of the tool’s basic specific tones.

A control means, among other things, the following:

  • General inspection of the tool
  • Function test
  • A certificate is issued after the equipment has complied with calibration requirements

Where do I find the serial number on my tool?

Get in touch with a certified Elpress expert

Whether you have questions about our products, need technical information, or require assistance with certifications, we’re here to help.
We’re committed to ensuring you have the best possible experience with Elpress, and we’re always here to support your needs.

    About us Innovations Elpress News Cases Global distribution

      Products
      • Cu terminals
        The terminals for Cu conductors 0.75 mm² to 1000 mm² are made of copper 99.9%
        AlCu terminals
        Elpress AlCu terminals for Al conductors are made of solid material.
        Al terminals
        Elpress terminals for Al conductors 16 mm² to 1200 mm² are made of solid aluminium 99.7%.
        C sleeves
        Branching sleeves for Cu conductors 6-300 mm², made of copper 99.95%.
        Pre-insulated terminals
        Elpress’ pre-insulated terminal consist of ring, fork and pin terminals made of copper and flat and round pin terminals of brass or tin bronze.
        Un-insulated terminals
        Elpress uninsulated connections up to 10 mm² consists of through connectors, rings, ferrules, forks and pin terminals made of electrolytic copper.
        End terminals
        Elpress pre-insulated and uninsulated end terminals are made of tin-plated copper.
        Overhead line connectors
        Elpress has a programme for overhead line joints that comprises products for copper lines, alloyed aluminium lines of type AlMgSi (Super B) and Al59 and FeAl lines.
        Shearbolt connectors
        Shearbolt connectors are intended for stranded and solid aluminium and copper cable, low voltage and medium voltage up to 36 kV.
      • Mechanical hand tools
        Mechanical hand tools for crimping 0,14-120 mm².
        3,5 t system
        Electrohydraulic, electromechanical and hydraulic hand tools with up to 3.5 tons of pressing force.
        6 t system
        Crimping heads, hydraulic hand tools and battery-powered crimping tools with up to 6 tons of crimp force.
        13 t system
        Crimping heads, hydraulic hand tools and battery-powered crimping tools with up to 13 tons of crimp force.
        25 t system
        Crimping heads with up to 25 tons of crimp force.
        35 t system
        Crimping heads with up to 35 tons of crimp force.
        40 t system
        Crimping heads with up to 40 tons of crimp force.
        Hydraulic pumps
        Hydraulic foot pump and mains and battery operated pumps.
        Crimp stations and table stands
        Crimp stations for industrial crimping. Table stands designed for operators with high frequency use of the C2 crimp head.
        Dies, matrices and punches
      • Cutting tools
        Hydraulic cable cutters
      • Assortment boxes
        Cable joint and terminal
        Cable clamps
      • Deep earthing system FS
        Accessories for depth earthing, tip, leading rod, extension rod, withdrawal handle and driving cap.
        Deep earthing system FSHD
        Accessories for depth earthing, tip, leading rod andextension rod. For hard and stony soils.
        Driving studs for FS and FSHD
        Driving studs for Elpress deep earthing system, specially designed for use with the FS21 and FS31 rod.